Nokia
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \
*#7328748263373738# resets security code.
Default security code is 12345
Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser.
Samsung
- *#06# -> Displays imei
- *2767*5282# -> Java Reset and (Deletes all Java Midlets)
- *2767*63342# -> Reset Media (Deletes All Sounds and Pics)
- *2767*927# -> Wap Reset
- *#9998*4357# -> Help Menu
- *#9998*5282# -> Java menu (GRPS/CSD settings for JAVA server)
- *#9999#0# -> Monitor Mode
- *#9999# or *#9998*9999# -> Software Version
- *#8888# or *#9998*8888# -> Hardware Version
- *#9998*746# or *#9998*0746# or *#0746# -> Sim Infos
- *#9998*523# or *#9998*0523# or *#0523# -> Display Contrast
- *#9998*842# or *#9998*0842# or *#0842# -> Vibration On (until you push OK)
- *#9998*289# or *#9998*0289# or *#0289# -> Buzzer On (until you push OK)
- *#9998*288# or *#9998*0288# or *#0288# -> Battery & Field Infos
- *#9998*377# or *#9998*0377# Error log
- *#9998*778# or *#9998*0778# or *#0778# -> Sim Service table
- *#9998*782# -> show date and alarm clock
- *#8999*638# -> show network information
- *#9998*5646# -> change operator logo at startup
- *#9998*76# -> production number
- *#9998*968# -> view melody for alarm
- *#9998*585# -> Non-Volatile Memory (NVM)
- *#3243948# -> Digital Audio Interference Off
- *#32436837# -> Digital Audio Interference
- *#9999# -> Show Software Version
- *#0837# -> Show Software Version (instructions)
- *#0001# -> Show Serial Parameters
- *#9125# -> Activates the smiley when charging.
- *#9998*228# -> Battery status (capacity, voltage, temperature)
- *#9998*246# -> Program status
- *#9998*324# -> Debug screens
- *#9998*364# -> Watchdog
- *#9998*427# -> Trace Watchdog
- *#9998*544# -> Jig detect
- *#9998*636# -> Memory status
- *#9998*785# -> RTK (Run Time Kernel) errors
- *#9998*786# -> Run, Last UP, Last DOWN
- *#9998*837# -> Software Version
- *#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected
- *#9998*872# -> Diag
- *#9998*947# -> Reset On Fatal Error
- *#9998*999# -> Last/Chk
- *#9998*9266# -> Yann debug screen (=Debug Screens?)
- *#9998*9999# -> Software version
- *2767*2878# -> Custom EEEPROM Reset
- *2767*3855# -> Full EEPROM Reset
This code will remove sp lock in some models
But also changes IMEI to 447967-89-400044-0,
Samsung A300, A400, A800
*2767*637#
____________________________________________
Samsung E500, E700
*2767*688#
In newer phones:
#*7337#
____________________________________________
Samsung E715
Turn off the phone. Put a non-accepted Simcard and turn it on.
Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones: #*7337#
____________________________________________
Samsung M100
Type *#9998*627837793#. Then type *#9998*737#. Press >/[] (Play Stop) until phone shows NCK/SPCK number. Press Exit.
Type #0111*CODE# (Code is the last 8 digits of the NCK/SPCK)
____________________________________________
Samsung P400
*2767*3855#
In newer phones:
*2767*927#
____________________________________________
Samsung S100, S300
*2767*7822573738#
____________________________________________
Model: Samsung S105
Remove Simcard. Enter *2767*7822573738# and after phone reboots, enter #0111*00000000#
____________________________________________
Samsung s300 unlock code
enter these 5 codes without sim card in phone!
your phone should then be unlocked
1. *2767*63342#
2. *2767*3855#
3. *2767*2878#
4. *2767*927#
5. *2767*7822573738
____________________________________________
Samsung S307
Turn off the phone. Put a non-accepted Simcard and turn it on.
Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones: #*7337#
____________________________________________
Samsung S500
*2767*3855#
In newer phones:
*2767*927#
____________________________________________
Samsung SGH600, SGH2100
*2767*3855#
*2767*2878#
____________________________________________
Samsung v200 unlock codes
Enter these codes into phone without sim in phone
This will not work on some new versions
1. *2767*63342# then press green button
2. *2767*3855# then press green button
3. *2767*2878# then press green button
4. *2767*927# then press green button
5. *2767*7822573738# then press green button
____________________________________________
Samsung X100, X600
Turn off the phone. Put a non-accepted Simcard and turn it on.
Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones:
#*7337#
____________________________________________
Samsung Universal
TEMPORARY UNLOCK:
Put a non-accepted Simcard and turn it on. Type *#9998*3323#.
Press Exit. You will get a new menu. Select Malloc Fail.
In newer phones:
#*7337#
No comments:
Post a Comment